Parking Areas
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
The Nova PFC-S Dry Contact Sensor is a high-precision motion detection device that uses 5.8 GHz microwave technology to detect movement, activating connected automation systems with its dry contact output. Designed for environments requiring reliable motion sensing, it features a 360° detection range with adjustable sensitivity and time delay settings, suitable for various applications, from security to automation in commercial spaces. With IP20 protection and a compact form factor, the Nova PFC-S is easy to install and integrate into existing systems, making it a smart choice for advanced motion-triggered control in controlled indoor environments.
220-240VAC
50/60Hz
5.8GHz CW radar ISM band
<10mW
100%/75%/50%/25%
Adjustable (8sec/3min/8min/12min)
360 degrees
360 degrees
Indoors (Ceiling mounting)
Dry Contact
The Nova PFC-S Dry Contact Sensor is a high-precision motion detection device that uses 5.8 GHz microwave technology to detect movement, activating connected automation systems with its dry contact output. Designed for environments requiring reliable motion sensing, it features a 360° detection range with adjustable sensitivity and time delay settings, suitable for various applications, from security to automation in commercial spaces. With IP20 protection and a compact form factor, the Nova PFC-S is easy to install and integrate into existing systems, making it a smart choice for advanced motion-triggered control in controlled indoor environments.
Power Source |
220-240V/AC |
HF System |
5.8GHz CW radar ISM band |
Time Delay |
Min. 10Sec, Max. 12Min |
Detection Range |
360° |
Ambient Light |
3-2000LUX |
Detection Motion Speed |
0.6-1.5m/s |
Power Frequency |
50/60Hz |
Transmission Power |
<10mW |
Rated Load |
800W (Incandescent), 300W (LED Load) |
Install Height |
1.5-3.5m |
Power Consumption |
<0.5W |
Detection Distance |
2-16m (radius), Adjustable |
Consider the picture. S1, S2 set lux, S3, S4, set time S5, S6, set the sensitivity.
The chosen light response threshold can be infinitely from approx.10lux-30lux.
Time can be set 20s to 10min.Any movement detected before this time elapse will re-start the timer. It is recommended to select the shortest time for adjusting the detection zone and for performing the walk test.
Nova PFC-S is a surface-mounted microwave motion sensor designed for intelligent lighting control in commercial and residential spaces. Installed on standard ceilings or flat surfaces, it detects movement with wide coverage and turns lights ON automatically when people enter – then switches them OFF after the set delay. This helps keep corridors, washrooms, staircases and work areas safely lit while significantly reducing energy waste.
Discover the simple yet effective way NANO 16 transforms your space
Emits 5.8GHz microwaves with <0.2mW power, ensuring precise detection.
Detects movement (0.6–1.5m/s) within 360° range, adjustable 2–16m.
Activates lights (≤800W incandescent / 300W LED) with 10s–12min delay.
A microwave motion sensor works by emitting high-frequency waves and detecting changes in the reflected signal. When motion occurs within the microwave sensor range, the reflection shifts, triggering a response. Unlike passive sensors, microwave sensors actively scan their surroundings, making them ideal for detecting subtle movement, even through walls or glass.
Advanced technology meets practical design for superior motion detection
Advanced 5.8 GHz technology for reliable motion detection through walls and doors
Comprehensive coverage for peace of mind
Smart power management reduces consumption
Designed for indoor environments
Adjustable light sensitivity
Power consumption
Output
Current
Discover how the Nova PFC-S Microwave Motion Sensor automates lighting in everyday circulation and work areas with reliable detection and efficient, surface-mounted installation.
Enable hands-free lighting in modern workspaces. Nova PFC-S detects entry and movement in cabins, meeting rooms and open-plan zones, keeping lights ON during occupancy and turning them OFF after people leave to avoid unnecessary burning hours.
Improve hygiene and convenience by removing the need to touch switches. Nova PFC-S turns lights ON automatically when someone enters common washrooms or toilets and switches them OFF after the configured hold time once the area is vacant.
Maintain bright, safe corridors and lift lobbies only while they are in use. The surface-mounted sensor continuously monitors movement along the path, ensuring escape routes remain well-lit during activity and saving power when empty.
Avoid dark stairs without running lights 24/7. Nova PFC-S responds quickly to people using staircases and landings, providing automatic ON during movement and OFF after the selected delay, enhancing safety and reducing energy costs.
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
Experience intuitive lighting control with Nova PFC-S’s adjustable sensing modes and timing options.
In Daylight mode, Nova PFC-S only turns lights ON when two conditions are met: motion is detected and the ambient light level is below the set lux threshold. This prevents lights from switching on in naturally bright spaces such as window-side corridors, stair landings with skylights or well-lit offices.
When there is enough natural light, the sensor keeps the light OFF even if motion is detected, preventing unnecessary use of artificial lighting.
When the ambient light falls below the selected lux level and Nova PFC-S detects movement, the light switches ON automatically for safe and comfortable visibility.
Once motion stops, the light stays ON for the chosen hold time and then switches OFF automatically, ready for the next detection cycle.
The daylight threshold is set to 2000 lux to disable the light. It turns on when movement is detected, and after people leave, the light turns off once the hold time of 30 seconds has elapsed. Applications include dimly lit areas such as basement parking and underpasses.
As soon as a person enters the detection zone, the sensor switches the light ON to full brightness.
As long as movement continues within the detection area, the light remains ON, ensuring a safe and comfortable environment.
After the last detection and the expiry of the configured hold time, the light turns OFF automatically to save energy.
Nova PFC-S uses an adjustable daylight (lux) setting to sense how bright the space already is. It can be configured so that lights only come ON when the room is actually dark, helping avoid wasted energy in naturally lit corridors, offices and staircases.
Set the detection range to suit your layout. Nova PFC-S allows sensitivity adjustment so that motion is detected only within the intended zone, helping minimise false triggers from neighbouring rooms, open doors or passing traffic.
Each new movement detected by Nova PFC-S resets the internal timer. Lights remain ON continuously while people are present, ensuring uninterrupted illumination during busy periods in offices, washrooms and circulation areas.
Choose how long the lights should stay ON after the last detection. The adjustable hold time lets you fine-tune behaviour for each space—from short delays for corridors and washrooms to slightly longer durations for cabins and meeting rooms.
Find answers to common questions about Nova PFC-S
Nova PFC-S is a surface-mounted microwave motion sensor designed for automatic lighting control in offices, washrooms, corridors, staircases and other indoor spaces. It detects movement using high-frequency waves and turns lights ON when motion is present, then OFF after a preset delay, improving both safety and energy efficiency.
Nova PFC-S offers a wide coverage area suitable for typical ceiling heights in commercial and residential projects. The actual detection range depends on mounting height, orientation, surrounding materials and the selected sensitivity setting. For exact performance values, please refer to the Nova PFC-S technical data sheet supplied with the product.
Nova PFC-S can be used with most commonly used lighting fixtures when wired according to the connection diagram—such as LED luminaires with appropriate drivers and other compatible loads within the sensor’s rated output. Always confirm compatibility with the luminaire manufacturer or your electrician before installation.
Yes. Nova PFC-S is primarily designed for surface mounting on ceilings, but it may also be installed on suitable wall or soffit surfaces where the detection pattern suits the application. Correct mounting height and angle are important to ensure reliable sensing; follow the installation guidelines in the datasheet.
Yes. Nova PFC-S typically provides adjustable parameters such as detection sensitivity (range), hold time (delay) and daylight (lux) threshold. These settings allow you to fine-tune how quickly lights switch OFF and under what light conditions they should turn ON.
Nova PFC-S is ideal for indoor circulation and work areas including offices, cabins, meeting rooms, washrooms, toilets, corridors, lift lobbies, staircases and similar spaces where automatic, presence-based lighting control is required and a clean surface-mounted solution is preferred.
© Sensinova India 2025. All rights reserved.
